FlexLED from is a low voltage, energy efficient, mono-chromatic, flexible LED strip designed specifically for illuminating logos, signs, channel and backlit letters.

FlexLED comes in 300mm sections and ultises high power LEDs on a flexible circuit board. It can be cut every 3 LEDs (50mm) is is easily joined with jumper connection leads.
Mounting is on screw or self adhesive clips.
Suitable for dry locations only.

Features:

• Flexled strips connect together via jumper cables.
• Four jumper sockets per strip for easy connection to other Flexled strips.
• The Flexled strips can easily be cut in the field.
• Bend radius: 1.5" (38mm).

Benefits:

• Smallest size
• Highest performance
• Higher reliability
• Optically superior
• Improved thermal performance
• EDS protected, with a built in Zener Diode
• Flip chip technology so there is no wire-bond to fail.
• Flip-chip packaging is clearly superior to that of conventional wire-bond.
• Thicker and more even phosphor distribution for better colour consistency
• This 4mm LED package was designed for illumination applications
• Better angle consistency

The Flexled System:

• The Flexled strip - available in 305mm segments
• 12V power supply - available in a full range of wattages
• Power / jumper cables to connect the strips together without solder
• Mounting clips for easy installation

Energy Efficient:

• One 305mm strip uses:
• 2.4 watts per strip
  
• Power supplies are available in a range from 60 to 300 watts
• Maximum distance from power supply to Flexled strip is 10m

About this product:

• Product brochure